DP-MUX - switches DisplayPort™ and other computer signals

With DisplayPort™ KVM switches, you can operate 2 computers over set of monitor, keyboard/mouse only. The switches are stand-alone devices.

DisplayPortMUX devices switch the following signals:

  • DisplayPort™ 1.1
  • Keyboard/mouse
  • USB 2.0 transparently
  • Audio

Product details

DetailsVariantsInstallationSpecifications

Video

  • DisplayPort™ 1.1 or DVI on output side
  • E-DDC support
  • DisplayPort™ 1.1 resolutions up to 2560 × 1600 @ 60Hz (at 30bpp colour depth)
  • Single-link DVI resolutions up to 1920 × 1200 @ 60 Hz (on output side only)
  • Colour mode DisplayPort™ up to 48bit
  • Colour mode DVI up to 24bit
  • Data transfer rate up to 10.8 Gbit

Device

  • Accesses the computer's standard interfaces only
  • Switching via push button, keyboard hotkeys or serial device connected to the service interface
  • Requires no software installation
  • Available as desktop and 19" rack mount variant
  • Internal power supply
  • Aluminium housing for best interference resistance
  • Hot-pluggable

Signals

  • USB Keyboard / Mouse
  • USB 2.0 transparent
  • Audio

System upgrade

  • Flash upgrade at device

Design

  • Available as desktop (DT) or rack mount (RM) variant

Peripheral connections

  • Available for USB connections 

Installation

Connect the computers to the back side of the device. Distinctive standard cables connect keyboard, mouse, audio and USB interfaces to the switch.

  • Cable length of PS/2 cable sets: 2 m, 5 m
  • Cable length of USB cable sets: 2 m, 5 m

For connecting the user console simply link keyboard, monitor, mouse, speakers and USB devices to the intended interfaces.

To find out more details about the startup, you can download the DP-MUX manual.

Specifications

PrincipleStand-alone KVM switch
MediumStandard cable sets
VariantsFor 2 computers with single video
ResolutionDisplayPort 1.1 up to 2560 x 1600 @ 60 Hz
(at 30 bit colour depth) including 4k (Ultra HD) @ 30 Hz or
@ 60 Hz by using multichannel variants
Single-link DVI up to 1920 x 1200 @ 60 Hz
(on output side only)
Colour mode DVI up to 24bit
Further featuresE-DDC support per input channel, Flash upgrade at device
ApplicationDesktop, control room, test scenarios, office

Product images